PRIM hodinky

PRIM hodinky - výrobce luxusních a vysoce ceněných hodinek PRIM. Hodinky Prim jsou tradiční českou značkou jejichž výroba momentálně probíhá ve Frýdku-Místku. Všechna licenční práva ke značce PRIM zakoupila v roce 2001 společnost MPM-QUALITY v.o.s., která je v oblasti výroby hodinek také držitelem certifikátu „Czech Made“.

PRIM TOURLILLON HODINKY

PRIM DAKAR KOLECE

PRIM BY JOSEF KLIR

KLASICKÁ KOLEKCE PRIM

DÁMSKÁ KOLEKCE PRIM

DĚTSKÁ KOLEKCE PRIM

PRIM AUTOMATY

PRIM CHRONOGRAFY

SPORTOVNÍ HODINKY PRIM QUARTZ

PRIM AUTOMATY

RÁDIEM ŘÍZENÉ HODINKY PRIM

KAPESNÍ HODINKY PRIM

Za začátek průmyslové hodinářské výroby u nás lze považovat rok 1946, kdy byl v Liberci zřízen podnik Chronotechna. O dva roky později byl založen národní podnik Chronotechna se sídlem ve Šternberku.

Plán na perspektivní výrobu náramkových hodinek vznikl již v roce 1948, avšak k jeho realizaci došlo až v letech padesátých. Práce na prvním modelu byly zahájeny v první polovině roku 1952. Měl 15 rubínových kamenů, kotvový krok a samokompenzační vlásek. Již roku 1954 bylo vyrobeno pět prototypů. Jejich zkoušky dopadly na výbornou, a tak byla v lednu 1957 zahájena sériová výroba. Tehdejší Československo se tak začlenilo mezi pouhý tucet států světa schopných vyrobit náramkové hodinky. Hodinářství mělo i v té době výjimečné postavení v rámci ostatních průmyslových odvětvích. Složitý hodinkový strojek se již v té době sestával z více než stovky součástí, jejichž rozměry se určovaly na desetiny a setiny milimetru. Následujícího roku se i pro náramkové hodinky začala používat stejná značka, jakou Chronotechna již dříve dala budíkům a nástěnným hodinám - PRIM.

Po roce 1989 byl národní podnik Chronotechna privatizován. Naše společnost zabývající se výrobou a distribucí hodinek již 16 let, zakoupila v roce 2001 ochrannou známku PRIM, registrovanou na Úřadu Průmyslového Vlastnictví v Praze. Po době, kdy na konci 90. let byla ukončena výroba těchto hodinek, jsme navázali na tradici původní české značky. Postupně jsme téměř zapomenutou značku opět uvedli v život. Vyrábíme dostupné a kvalitní hodinky pro běžné nošení i společenské příležitosti, jako tomu bylo dlouhá léta v minulosti. Ve spolupráci s vynikajícími českými designéry a odborníky vznikají nové kolekce hodinek, jak v moderním designu, tak i retro kolekce za využití nových technologií a materiálů. Naše modely „PRIMEK“ jsou navrhovány, kompletovány a testovány v České republice. Kvalita našich hodinek je dnes na špičkové úrovni, proto jsme v roce 2010, po předchozích náročných testech, získali certifikát kvality „CZECH MADE“.

Spojili jsme pro Vás tradici a eleganci.

TECHNOLOGIES

Case materials

We only use the finest materials to make our watch cases. The most widely used materials are 316L stainless steel, titanium, and in some models silver ‘925’ or 14 carat gold ‘585’.

Steel 316L

316L stainless steel is strong, tough and corrosion-resistant. It is also used in the food industry and to make medical equipment, especially surgical instruments. It is a high-quality material and must be precision-milled using modern CNC machines.

Titanium

Titanium is used in sports watches and ladies’ watches. It is a light, grey metal, which retains its colour and is hypoallergenic. When polished, titanium looks almost identical to steel, but it is 32% lighter. Thanks to its low weight and exceptional strength, titanium is widely used in the aircraft industry and in medical equipment.

Surface finishing

Surface finishing may involve polishing the steel to a high mirror-like shine, or brushing it to a matt finish. Until recently, other methods of finishing steel were not used. However, today we can also create a gold plate using the state-of-the-art new IPG method. The same method can also be used to create other colours – IPGR red plating, or fashionable black IPB plating (matt or gloss shine).

IP – Ion plating

Ion plating is a process of physical vapour deposition (PVD). Put simply, this process involves bombarding the surface of the case or bracelet with ions, forming a carbide layer. This is done in a vacuum at high temperatures. The resulting carbide layer is several times harder than that created by previous methods, making it highly scratch resistant with excellent all-round durability. Ion plating is also used in the production of tools, milling machinery and other similar equipment.

Watch crystals

Sapphire glass

Some of our models feature sapphire glass crystals. This material is in fact synthetic sapphire – corundum, a material which provides unmatchable resistance against scratches and damage. On the Mohs scale of mineral hardness this sapphire (corundum) reaches level 9, just one degree below diamond.

Silica glass – mineral glass

This is the most commonly used variety of glass in PRIM watches. Its main advantage is its excellent price/quality ratio. It is also easier to work with than sapphire glass. Though less hard than sapphire glass, it is tough enough to meet the demands placed on it by everyday use.

Quartz movements

This involves the use of a crystal whose frequency controls the accuracy of the watch movement. The movement is battery-powered and gives excellent accuracy with only tiny deviations. The lifespan of the battery depends on a range of factors; it usually lasts around two years.

Radio control – DCF

Some of our timepieces feature movements controlled by radio signals. These watches receive signals from transmitters using atomic clocks. The transmitter for Central Europe is located in Mainflingen (Germany), and transmits at 77.5 kHz. Some multi-frequency mechanisms can receive signals in other time zones if they are within range of a transmitter.

Mechanical movements

Mechanical watch movements are powered by a coiled mainspring which gradually unwinds. The watch is wound using the crown. The power reserve is 36 hours.

Self-winding watch

A mechanical movement wound by a weight positioned on a rotor which turns with movements of the hand, winding the spring. The spring has a clutch mechanism to prevent over-winding. These watches can also be wound using the crown if they have not been used for a while.

Watch back

We use only 316L stainless steel. Some watch backs feature a glass window allowing the wearer to view the movement. The back may be pressed on to the rest of the case or attached by a screw thread. The watch back bears markings giving details of the model.

Water resistance

Tabulka vodotesnosti
Warning: Before using a water resistant watch in water, check that the crown is in the default position or is screwed in. Do not move the crown and buttons if the watch is wet or underwater.
We have joined the tradition and elegance.